Mercedes-Benz S 4300 - Manual (Page 34)

33
Getting started
Unlocking
1 KEYLESS-GO start/stop button
Before you press the KEYLESS-GO
start/stop button 1, the vehicle’s
on-board electronics have status 0 (as with
SmartKey removed).
The SmartKey with KEYLESS-GO must be
located in the vehicle.
̈ Make sure the gear selector lever is set
to P.
̈ Do not depress the brake pedal.
Position 1
̈ Press the KEYLESS-GO start/stop
button 1 once.
This supplies power to some electrical
consumers, such as seat adjustment.
Ignition (or position 2)
̈ Press the KEYLESS-GO start/stop
button 1 twice.
This supplies power to all electrical
consumers. All the lamps in the instru-
ment cluster come on.
For more information, see “SmartKey with
KEYLESS-GO*” (
୴ page 91).
For information on starting the engine us-
ing the KEYLESS-GO start/stop button,
see “Starting with KEYLESS-GO*”
(
୴ page 44).
i
If you now press the KEYLESS-GO
start/stop button
ț once again, the ignition (position 2)
is switched on
ț twice, the power supply is again
switched off
i
If you now press the KEYLESS-GO
start/stop button once, the power sup-
ply is again switched off.