Mercedes-Benz S 4300 - Manual (Page 291)

290
Operation
Tires and wheels
̈ Press the reset button on the instru-
ment cluster (
୴ page 22).
The following message will appear in
the multifunction display:
CHECK CURRENT TIRE PRES.?
̈ Press æ button.
The following message will appear in
the multifunction display:
TIRE PRES. MONITOR REACTIVATED
The tire inflation pressure monitor will
now monitor the tire inflation pressure
values of all four tires.
Afterward, the following message will
appear in the display:
TIRE PRES. DISPLAY
APPEARS AFTER
DRIVING A FEW MINUTES
This display appears until the individual
inflation pressure values are matched
with the tires. The individual values are
then displayed (
୴ page 287).
If you wish to cancel activation:
̈ Press ç button.
If one of the following messages appears in
the multifunction display:
ț TIRE PRES. MONITOR
REACTIVATE AFTER
CORRECTING PRESSURE!
ț TIRE PRES.
PLEASE CORRECT!
̈ Check the tire inflation pressures and
correct them if necessary.
̈ Reactivate the tire inflation pressure
monitor.
i
If you are transporting a deflated tire in
the vehicle, do not activate the tire
inflation pressure monitor until
ț the deflated tire is no longer in the
vehicle
ț you have inflated the tire to the cor-
rect pressure