Mercedes-Benz S 4300 - Manual (Page 201)

200
Controls in detail
Sliding/pop-up roof
̈ Switch on ignition.
Opening and closing the
sliding/pop-up roof
̈ To open, close, raise or lower the slid-
ing/pop-up roof, move the switch to re-
sistance point in the required
direction 1 to 4.
Release the switch when the roof has
reached the desired position.
Express-opening and Express-closing
the sliding/pop-up roof
̈ To open, close, raise or lower the
sliding/pop-up roof, move the switch
past the resistance point in the re-
quired direction 1 to 4 and release.
The sliding/pop up roof opens or clos-
es completely, or opens to the last set
opening position.
Stopping the sliding/pop-up roof
̈ Move the switch in any direction.
!
To avoid damaging the seals, do not
transport any objects with sharp edges
which can stick out of the
sliding/pop-up roof.
Do not open the sliding/pop-up roof if
there is snow or ice on the roof, as this
could result in malfunctions.
The sliding/pop-up roof can be opened
or closed manually should an electrical
malfunction occur (
୴ page 352).
i
You can also open or close the
sliding/pop-up roof using the:
ț SmartKey (summer opening/con-
venience future) (
୴ page 201)
ț button , in the control panel of
the automatic climate control
(
୴ page 182)
ț button e in the control panel of
the automatic climate control
(
୴ page 188)
i
Selecting a sliding/pop-up roof open-
ing position
To select a sliding/pop-up roof opening
position, press the switch to the resis-
tance point and release it when the
sliding/pop-up roof has reached the
desired position.
The sliding/pop-up roof now opens to
the position set when the switch is
pressed past the resistance point in the
“open” direction.
i
If the movement of the
sliding/pop-up roof is blocked during
the closing procedure, the roof will
stop and reopen slightly.