Mercedes-Benz S 4300 - Manual (Page 152)

151
Controls in detail
Control system
̈ Press button k or j.
The stored messages will now be dis-
played in the order in which the mal-
functions have occurred. See the
“Practical hints” section for malfunc-
tion and warning messages
(
୴ page 312).
Should any malfunctions occur while driv-
ing, the number of malfunctions will reap-
pear in the display when the SmartKey in
the starter switch is turned to position 0 or
removed from the starter switch.
Settings menu
In the SETTINGS menu there are two func-
tions:
ț The function RESET WITH R BUTTON FOR
3 SEC. , with which you can reset all
settings to the original factory settings.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the SETTINGS menu appears in the
display.
Resetting all settings
You can reset all the functions of all sub-
menus to the factory settings.
̈ Press the reset button on the instru-
ment cluster (
୴ page 22) for approxi-
mately three seconds.
In the display you will see the request
to press the reset button again to con-
firm.
̈ Press the reset button again.
The functions of all the submenus will
reset to factory settings.
i
The message memory will be cleared
when you turn the SmartKey in the
starter switch to position 1 or 2. You
will then only see high priority malfunc-
tions (
୴ page 312).
i
The settings you have changed will not
be reset unless you confirm the action
by pressing the reset button a second
time.
Due to safety reasons, resetting all of
the settings while driving will not reset
all of the values in the
LIGHTING or the
VEHICLE menu.