Product specifications – Moxa Technologies IA5150 User Manual

Page 7

NPort IA5150/5250 Series User’s Manual

Introduction

1-3

Product Specifications

NPort IA5150-M-SC/5150I-M-SC/5150-S-SC/5150I-S-SC LAN
Fiber Port

1 100BaseFX port (SC connector)

NPort IA5150/5150I/5250 LAN
Ethernet Switch Ports

2 10/100BaseT(X) ports (RJ45 connector)

Protection

Built-in 1.5 KV magnetic isolation

Optical Fiber
Distance

Multi mode: 0 to 2 km, 1310 nm (62.5/125 µm, 500 MHz*km)
Single mode: 0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km)

Min. TX Output

Multi mode: -20 dBm
Single mode: 0 to 40 km, -5 dBm

Max. TX Output

Multi mode: -14 dBm
Single mode: 0 to 40 km, 0 dBm

Sensitivity

-36 to -32 dBm (Single), -34 to -30 dBm (Multi)

NPort IA5150 Series Serial Interface
Interface RS-232/422/485
No. of Ports

Port Type

Male DB9 for RS-232;
5-pin terminal block for RS-422/485

Signals

RS-232:

TxD, RxD, RTS, CTS, GND, DTR, DSR,
DCD

RS-422:

Tx+, Tx-, Rx+, Rx-, GND

RS-485 (2-wire): Data+, Data-, GND

RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND

RS-485 Data Direction

Patented ADDC™ (Automatic Data Direction Control)

Isolation 2

(5150I/5150I-M-SC/5150I-S-SC)

Serial Line Protection

15 KV ESD for all signals

NPort IA5250 Serial Interface
Interface RS-232/422/485
No. of Ports