Moxa Technologies IA5150 - Manual (Page 35)

NPort IA5150/5250 Series User’s Manual Web Console Configuration
5-10
Serial Settings
Click on Serial Settings, located under Main Menu, to display serial port settings for ports 1
and 2.
To modify serial settings for a particular port, click on either Port 1 or Port 2 under Serial
Settings, located under Main Menu on the left side of the browser window.
Port alias
Setting Factory Default Necessity
1 to 15 characters
(E.g., PLC-No.1) None Optional
“Port alias” is included to allow easy identification of the serial devices that are connected to
NPort IA5150/5250’s serial port.
Serial Parameters
ATTENTION
Check the serial communication parameters in your Serial Device’s user’s manual. You should
set up NPort IA5150/5250’s serial parameters with the same communication parameters used by
your serial devices.