Low voltage evaluation hardware set specifications – Motorola M68HC08 User Manual
Page 21
System Description
System Specification
DRM028 — Rev 0
Designer Reference Manual
MOTOROLA
System Description
21
2.3.2.2 Low-Voltage Evaluation Hardware Set Specification
This hardware set is dedicated for 12 V voltage and very low power
(phase current < 4 A). The specifications for a low-voltage evaluation
hardware and motor set are listed in
. It is targeted first of all to
software evaluation with small motors.
2.3.2.3 Low-Voltage Hardware Set Specification
This hardware set is dedicated for medium power (phase current < 50 A)
and automotive voltage. The specifications for a low-voltage hardware
and motor set are listed in
. The hardware power stage board
is dedicated for 12 V, but can be simply configured to a 42 V supply
(described in documentation for the ECLOVACBLDC board). The
supplied motor is targeted for 12 V.
Table 2-3. Low Voltage Evaluation Hardware Set Specifications
Hardware Boards
Characteristics
Input voltage:
12 Vdc
Maximum dc-bus voltage:
16.0 V
Maximal output current:
4.0 A
Motor Characteristics
Motor type:
4 poles, three phase, star
connected, BLDC motor
Speed range:
< 5000 rpm (at 60 V)
Maximal line voltage:
60 V
Phase current:
2 A
Output torque:
0.140 Nm (at 2 A)
Drive Characteristics
Speed range:
< 1400 rpm
Input voltage:
12 Vdc
Maximum dc-bus voltage:
15.8 V
Protection:
Over-current,
over-voltage, and
under-voltage fault
protection
Load Characteristic
Type:
Varying
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
.
..