Metra Electronics 99-8225G - Manual (Page 3)

99-8225G DASH DISASSEMBLY
Toyota Venza 2009-2010
1
D isconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Unclip and remove the trim panel to
the right of the shifter. (Figure A) 2
Remove (1) Phillips screw from the
bottom of the climate control then
unclip and remove the climate
control. (Figure B) 3
Remove (4)10 MM bolts securing the
radio. Note: You will need a univer-
sal swivel head socket adapter to
get to the bottom left bolt.
(Figure C) 4
Remove (4) Phillips screws securing
the factory radio to the a/c vent
panel. (Figure D) 5
A
B
C
REAR VIEW - RADIO AND A/C VENT PANEL
RADIO
D
Continue to kit assembly.