Motorola RDV2080D - Manual (Page 54)

PROG
RAM
M
ING
FEATUR
ES
English
52
NUISANCE CHANNEL DELETE
Nuisance Channel Delete allows you to
temporarily remove channels from the ‘Scan
List’. This feature is useful when irrelevant
conversations on a ‘nuisance’ channel tie up
your radio's scanning features. To delete a
channel from the scan list:
• Start ‘Scan Mode’ by short pressing the SB2
button (*)
• Wait until the radio stops on the channel you
wish to eliminate, then long press the SB2
button to delete it.
• The channel will be removed until you exit
‘Scan Mode’ by pressing the SB2 button again
or if radio is turned OFF.
Note: (*)Assumes the SB2 button is not
programmed to another function different
from the default.
CPS (COMPUTER PROGRAMMING
SOFTWARE)
The easiest way to program or change features
in your radio is by using the Computer
Programming Software (CPS) and the CPS
Programming Cable(*). CPS Software is
available for free as web based downloadable
software at:
www.motorolasolutions.com/RDX
To program, connect the radio via the Drop-in
Charger Tray and CPS Programming Cable as
shown in the picture above.
Radio to be
programmed
CPS
Programming
Cable
Drop-in
Charger
Tray
Mini-connector
USB
Connector
CPS Software
BRUS_display.book Page 52 Monday, January 16, 2012 5:28 PM