Motorola RDV2080D - Manual (Page 51)

PROG
RAMM
ING
FEAT
URES
English
49
for a particular channel, do not press SB2
button to start scanning, as the radio will do
it automatically.
Programming Scan List
You can enable/disable the Channel Scanning
feature for each channel in your radio. To do
so, enter ’Programming Mode’ and select the
channel you want to program. Scroll through
the programming options by short pressing the
PTT button until you reach the ‘Scan
Programming Mode’. The radio display will
show the scan icon as follows:
Both the channel number and current scan
setting (YES=ON or NO=OFF) will be blinking
on the display, indicating that you can choose
your setting. To set the channel number, press
the / buttons until you reach the desired
channel number.
Once you have selected the channel, proceed
to enable (‘YES’) or disable (‘NO’) the scan
feature by toggling the SB2 (*) button. Once
you have set the values you need, long press
the PTT button to save an exit.
Notes:
• (*)This assumes the SB2 button is not being
programmed for a different mode.
• If the MAX CHAN setting in the radio is set to
1, the Scan Programming option will not show
(will be disabled).
YES
BRUS_display.book Page 49 Monday, January 16, 2012 5:28 PM