Motorola RDV2080D - Manual (Page 16)

RADIO OVERVIEW
English
14
• Programmable Button
Configured as Preset Channel 1.
• Programmable Button
Configured as Preset Channel 2.
• Programmable Button
Configured as Tx Power Selection.
Note: A short press of either preset button (A or B)
tunes the radio to the preset channel and
the radio will play a good chirp. You can
assign different functions to these buttons
via the CPS. For example: Backlight Time
Out, Reverse Burst, Power Select, Scan/
Nuisance Channel Delete, Monitor and Call
Tones. To learn more about how to program
these buttons refer to “Entering
Programming Mode” on page 42 and “CPS
(Computer Programming Software)” on
page 52.
Side Buttons
Push-to-Talk (PTT) Button
Press and hold down this button to talk, release
it to listen.
Side Button 1 (SB1)
The Side Button 1 is a general button that can
be configured by the CPS. The default setting
of the SB1 button is ‘Monitor’.
Side Button 2 (SB2)
The Side Button 2 is a general button that can
be configured by the CPS. The SB2 button
default setting is ‘Scan/Nuisance Channel
Delete’.
The Lithium-Ion (Li-Ion) Battery
RDX Series™ provides different types of
batteries. For more information, see “Battery
Features” on page 16.
A
B
C
BRUS_display.book Page 14 Monday, January 16, 2012 5:28 PM