Multi-Tech Systems RF802EW - Manual (Page 73)

73
Chapter 7 - LAN Client Settings
Access
Windows 95/98:
1.
In the Network dialog box, click the Access Control tab.
2. Select Share-Level access control.
3. Click OK twice to return to, and then close, the Network dialog box.
Note: You must restart your system for the new settings to take effect.
Once your machine has restarted, you may continue the configuration process.
Make Your New Connection (NT Server Connection):
Windows 95/98:
1.
Double-click My Computer.
2. Double-click the Dial-Up Networking folder.
3. Double-click Make New Connection (or Add New Connection, Win98).
4. Follow the on-screen instructions to configure your connection.
Windows NT:
1.
Double-click My Computer.
2. Double-click Dial-Up Networking.
3. When the Dial-Up Networking dialog box opens, click Install.
4. Follow the onscreen instructions to configure your connection.
Set Dial-up type (NT Server Connection):
Windows 95/98:
1.
Right-click the newly created connection icon, then click Properties; the My Connection dialog
box opens.
2. On the General tab, click Server Type. The Server Types dialog box opens. Select PPP:
Windows 95, Windows NT 3.5, Internet.
3. Select only the following check boxes: Log on to network, Enable software compression, and
TCP/IP. Do not change any other check boxes that are already selected.