Multi-Tech Systems RF802EW - Manual (Page 69)

69
Chapter 7 - LAN Client Settings
5. In the Manufacturers list, select Microsoft. In the Network Adapters list select Dial-up adapter.
6. Click OK (twice) to return to, and then close, the Network dialog box.
Windows NT:
Dial-up Networking adds PPP and SLIP protocol support, enabling your workstation to gain access to
a remote computer or network, even if your computer is not on a network.
1. Double-click My Computer, then double-click Dial-Up Networking. The following screen is
displayed:
2. Click Install, then follow the onscreen instructions to configure your connection.
Adding TCP/IP (NT Server Connection):
Windows 95/98/NT:
1.
In the Network dialog box, Configuration tab, click Add.
2. Select Protocol and click Add.
3. The Select Network Protocol dialog box is displayed. In the Manufacturers list [Win95 only],
select Microsoft. In the Network Protocols list, select TCP/IP [Win95/98] or TCP/IP Protocol
[WinNT only].
[Note: Windows NT workstation has no Manufacturers list.]
Win95/98 WinNT
4. Click OK twice to return to, and then close, the Network dialog box.