Motorola SB4100 - Manual (Page 22)

Verifying Your IP Address
The following basic instructions are for Windows 95
or Windows 98. If you are using a different
operating system, refer to that user guide.
To check the IP address:
1 On the Windows Desktop, click Start.
2 Select Run.
3 Type winipcfg.exe. A window similar
to the example is displayed.
4 Select your adapter name.
(the Ethernet card or USB device)
5 Click Renew.
6 Click OK after the system displays
an IP address.
If after performing this procedure your
computer does not access the Internet,
call your service provider. They will
assist in your configuration.
Introduction Before You Begin Installation Operation Basic Configuration Troubleshooting
16
SSUURRFFbbooaarrdd
R
TM