Motorola SB4100 - Manual (Page 20)

Installing USB Device Drivers
The USB drivers can interface with
Windows 98, 2000, or ME.
System files are needed when loading the
USB drivers. These files may already be on
your PC or you may be required to load
them from the Microsoft CD that came
with your PC.
1 Check that the USB cable is connected
from the PC to the cable modem. If it has
not been installed, refer to, “Installation
For Single User.”
2 Insert the CD into the CD driver. The
PC automatically recognizes the USB
connection.
Introduction Before You Begin Installation Operation Basic Configuration Troubleshooting
15
SSUURRFFbbooaarrdd
R
TM