Motorola SB4100 - Manual (Page 12)

Precautions
You must call your service provider to activate
your service. You need to provide the media
access control (MAC) address. This address
is found on the bar code label marked
HFC MAC ID on the rear panel.
The address format is 00:20:40:xx:xx:xx.
Introduction Before You Begin Installation Operation Basic Configuration Troubleshooting
• Do not block the ventilation holes on the sides
of the modem preventing it from overheating.
• Do not open the SB4100 cable modem. Refer
all service to your local service provider.
• Wipe the modem with a clean, dry cloth.
Never use cleaning fluid or similar chemicals.
Do not spray cleaners directly on the unit
or use forced air to remove dust.
TV cable
to cable outlet
Power cord to
electrical outlet
Ethernet to computer
Telco to phone outlet
USB to computer
7
SSUURRFFbbooaarrdd
R
TM