Motorola SB4100 - Manual (Page 10)

Equipment Check
Introduction Before You Begin Installation Operation Basic Configuration Troubleshooting
Power cord
USB cable
Telephone cable
SB4100
User Guide
CD-ROM
10/100Base-T shielded
Ethernet cable
Before you begin the installation, check that you have received:
Item Description
Power cord Required to connect the SB4100 to the electrical outlet.
One 10/100Base-T shielded
Ethernet cable* Required for connecting to the Ethernet port.
One USB cable* Required for connecting to the USB port.
SB4100 User Guide CD-ROM Contains User Guide and USB drivers necessary
for connecting to USB port.
Telephone cable Required to connect the SB4100D to the telephone jack.
You need to purchase a 75-ohm coaxial cable with F-type connectors for connecting your
SB4100 to the nearest cable outlet. If you have a TV attached to the cable outlet, you may need a
5-900 MHz splitter to use both the TV and the SB4100. These items are readily available at
consumer electronic stores and departments.
* Supplied by your service provider.
5
TM
SSUURRFFbbooaarrdd
R