Metrologic Instruments MS9535 User Manual
Page 8
4
Q
UICK
S
TART
(C
ONTINUED
)
5. Scan a bar code anywhere within 10 meters from the cradle. The scanner
will beep once and flash the white LED. The blue LED of the cradle will also
flash once, indicating that the bar code has been successfully read and
transmitted.
MS9535 Voyager
BT
also provides two modes of operation:
1. Auto-trigger
mode
When the scanner is at rest in the cradle, it is in auto-trigger mode. While in
this mode, present a bar code in the scanning field and the data is
automatically decoded and transmitted.
2. CodeGate
mode
When the scanner is removed from the cradle, it is in CodeGate mode.
While in this mode, scanned bar code data is only decoded and transmitted
when the CodeGate button is pressed.
MS9535 is shipped from the factory programmed with default settings.
Refer to the MetroSelect
®
Single-Line Programming Guide (
MLPN
00-
02544B) or MetroSet
®
2’s help files for instructions on how to configure the
scanner.