Macsense Connectivity XRouter Pro - Manual (Page 19)

2. Type the XRouter Pro's default IP address (192.168.1.1) in the
URL field. This is the area where you would normally enter a Web
site address such as “
www.macsense.com” .
3. Press Enter. The Username and Password window will then
appear.
4. Leave the User name field blank and type “admin“ as the default
password for the XRouter Pro. You can change the password
through a Web management page later. Click OK.
(See Figure 3.4-3)
Figure 3.4-3
Note: It is recommended to change the default “admin” password of your
XRouter Pro for security purpose. This can be done in the “Device Admin”
page of the web based configuration of the XRouter Pro. For more informa-
tion ont the “Device Admin” please refer to the Advance Configuration sec-
tion on this manual.
14
Chapter 3 - EASY INSTALLATION