Front panel – Motorola VT2442 User Manual
Page 9
VT2442 Voice Gateway User Guide
3
Configuration: Basic Advanced TCP/IP
Wireless
Front Panel
The front panel provides the following lights:
Light
Description
Phone 1, 2
Indicates the status of phone line one and optional line two, respectively:
•
Solid green — The phone for that line is on hook, registered with Vonage, and ready for use.
•
Blinking green — The phone for that line is ringing or off hook.
•
Blinking orange — You have voice mail.
•
Both blinking rapidly in unison with the Power light — The voice gateway is downloading a firmware
upgrade from Vonage. Please do not unplug or disconnect your voice gateway while it is downloading
firmware.
•
Off — The phone line is not registered for Vonage service. You cannot use it for phone calls.
Internet
Indicates the Internet connection speed:
•
Solid green —
•
Solid yellow — 10Base-T
Flashes when there is activity on the Internet connection.
Ethernet
1, 2, 3, 4
Indicates the speed of the respective Ethernet connection:
•
Solid green — 100Base-T
•
Solid yellow — 10Base-T
Flashes when there is activity on the respective Ethernet connection.
Power
If it is ever
red
— blinking or solid — restart the voice gateway (see
During a normal start-up, it lights in the following sequence:
•
Blinking once — You have turned the voice gateway on by plugging it in to AC power.
•
Blinking twice — The voice gateway is retrieving its
.
•
Blinking three times — The voice gateway is
its configuration file from Vonage.
•
Blinking four times — The voice gateway is connecting to the Vonage
•
(Optional) Blinking rapidly in unison with the Phone 1 and 2 lights — The voice gateway is
downloading a firmware upgrade from Vonage. Please do not unplug or disconnect your voice
gateway while it is downloading firmware.
•
Solid green — The voice gateway has successfully registered with Vonage. If a firmware upgrade was
needed, it has been successfully completed.