Marantz SC-7S2 - Manual (Page 21)

ENGLISH
17
HOW TO OPERATE FUNCTION AND HOW TO SET UP
ATTENUATE FUNCTION
With one touch, the volume can be decreased, instantly. The
ATT button on the SC-7S2 or the remote controller, is used for
this function.
The volume will be indicated in the display window & the
indicator above the ATT button will be illuminated.
Factory setting is -20dB. But this can be changed to -40dB, or
-60dB.
HOW TO SET UP THE ATTENUATION
LEVEL
q Press ATT button for more than 2 seconds.
w The Indicator above the ATT button will begin to flash, the
volume indication will be changed to the attenuation level
setting.
DISPLAY ATT
i n p u t s e l e c t o r
p o w e r
s t e r e o c o n t r o l a m p l i f i e r s c - 7 s 1
v o l u m e
VOLUME
ATT -
A SYNC B
DISPLAY ATT
i n p u t s e l e c t o r
p o w e r o n / o f f
s t e r e o c o n t r o l a m p l i f i e r s c - 7 s 2
v o l u m e
DISPLAY ATT
i n p u t s e l e c t o r
p o w e r
s t e r e o c o n t r o l a m p l i f i e r s c - 7 s 1
v o l u m e
A SYNC B
i n p u t s e l e c t o r
p o w e r o n / o f f
s t e r e o c o n t r o l a m p l i f i e r s c - 7 s 2
v o l u m e
DISPLAY ATT
e Press the ATT button, the attenuation level will be changed
with every press.
r Unless the button is pressed within 2 seconds, the
attenuation level will be fixed. Once the level is fixed, the
display will turn back to the volume indication.
The setting will be memorized.
DISPLAY ATT
i n p u t s e l e c t o r
p o w e r
s t e r e o c o n t r o l a m p l i f i e r s c - 7 s 1
v o l u m e
Press ATT button
Attenuat function Setting of level
Unit
or
Remote Controller
Light
Flash
06.8.9, 1:53 PM Page 17