Marantz SC-7S2 - Manual (Page 13)

ENGLISH
9
This connection can have options i.e. You may connect the units using either balanced or unbalanced
cables to connect your CD player and control Amp. But you can not inter match. Your Control Amp &
Power Amp can also be wired the same way. Please select either way of connection.
CONNECTIONS
COMPLETE BI-AMP CONNECTION
Enhance connection 2, by having one more control Amp. SC-
7S2, this is a wiring which separates Mid/High signal and Low
signal from the Pre-Amp section. In this event, the SC-7S2 is
used as Monaural Pre-Amps. And separate Left/Right
channels from the output terminal of CD player. As a result,
influences between L channel and R channel Mid/High signal
and Low signal will be eliminated.
By connection with the remote cable, a maximum of 6 SC-
7S2s can be operated together.
Caution
In the event of setting mode switch as , B channel
input can't be used.
CD Player
Pre-Amp
Speaker system
Pre-Amp
Power-Amp
Power-Amp
Complete Bi-Amp connection
Mid/High
speaker unit
Low Speaker
unit
06.8.9, 1:52 PM Page 9