Multi-Tech Systems ACCESS POINT RF802EW - Manual (Page 19)

Software Installation
19
13.The Setup Wizard: Modem Settings dialog box displays.
The final step in configuring your RF802EW for basic operations is to enter the model and
DTE baudrate of the modem you are using. This is an important setting that determines the
DTE baudrate or speed of communication between the RF802EW’s async port and your
modem or ISDN TA.
Select your modem and baudrate as described on the following pages.
Note: If you do not have a modem or ISDN TA attached to the RouteFinder async port, use
the default modem values.
14.To select your modem, click . The system loads modem information.