Multi-Tech Systems ACCESS POINT RF802EW - Manual (Page 14)

RouteFinder Quick Start Guide
14
11. The Asynchronous Port Function dialog box displays. Select Remote Access, IP
Routing (NAT Enabled) or IP Routing (NAT Disabled).
• Select Remote Access to allow remote users to dial-in to the network to access
resources as if the remote user is connected to the network locally. Continue
with the Remote Access instructions on page 17.
• Select IP Routing (NAT Enabled) to allow all users in the two IP segments (LAN
and WAN Ethernet) to share one IP address to the Internet. You may also select
this option to use the async port for dial-up backup in the event the DSL or cable
becomes unavailable.
Note: The IP Routing (NAT Enabled) feature of the async port is valid only if the
WAN port is configured as NAT Disabled.
• Select IP Routing (NAT Disabled) to connect other IP segments through the
async port. Proceed to the IP Routing instructions.
Click Next.