beautypg.com

Multi-Tech Systems ACCESS POINT RF802EW User Manual

Page 13

background image

Software Installation

13

10. The External IP Assignment dialog box displays.

Enter the WAN Ethernet IP address information provided by your ISP or other external
network administrator.

•

In the External IP Address box, enter the ISP or remote system’s IP address.

•

In the External IP Netmask box, enter the ISP or remote system’s IP segment netmask

For Class C networks, the Netmask is generally set to 255.255.255.0.

•

In the External Gateway IP Address box, enter the IP address of the ISP or remote

network’s Gateway to their network.

Note: If your ISP uses dynamic IP addressing, leave the External IP address and the
External Gateway IP address at the default values of 0.0.0.0. Set the External IP Netmask to
the default value of 255.255.255.0.

Click Next.

See also other documents in the category Multi-Tech Systems Hardware: