Multi-Tech Systems ACCESS POINT RF802EW - Manual (Page 17)

Software Installation
17
2. IP Routing (NAT Enabled) and
3. IP Routing (NAT Disabled)
If you select IP Routing for the asynchronous port, the Setup Wizard: IP Routing dialog box
displays.
Enter the information required to dial-up and login to your ISP’s remote server:
• Telephone Number: Enter the phone number used to dial your remote server (ISP).
Note: If you must dial a number to get an outside line (for example, “9”, or “0”), enter the
required number plus a “w”(wait) or a comma in the Telephone box (for example, 9w555-2323
or 9,,5552323). Each comma provides a 3-4 second delay.
• User Name: Enter the User Name for your remote server or ISP account.
• Password: Enter the Password for your remote server or ISP account.
• Password Verification: Re-enter the password for your remote account.
Click Next.