Motorola RDM2020 - Manual (Page 36)

GET
T
IN
G S
T
ART
E
D
English 28
COMPUTER PROGRAMMING SOFTWARE
In addition to the features that can be
configured in Basic and Advanced
Configuration via the radio panel, the Computer
Programming Software (CPS) can additionally
configure Transmit Time-Out Timer, PL
Reverse Burst, Alternate Battery Selection,
Backlight settings, Buttons Reset, CPS
Manager Lock, LED enabled/disabled, Power
Up Text, and Edit Scan List.
The Programming Cable RKN4155 (sold
separately) is required. The CPS Software is
available for download at no cost at:
www.motorola.com/RDX To configure the radio using the CPS, connect
the radio via the Drop-in Charger Tray and
CPS Programming Cable as shown in the
picture below.
Transmit Time-Out Timer
This timer sets the amount of time (60, 120 or
180 sec.) that the radio can continuously
transmit before transmission is automatically
terminated. A continuous tone is generated
when this timer expires, indicating a time-out.
Radio to be
programmed
CPS
Programming
Cable
Drop-in
Charger
Tray
Mini-connector
USB
Connector
CPS Software