Motorola RDM2020 - Manual (Page 24)

RADIO OVERVIEW
English 16
CHARGING THE BATTERY
The RDM Series MURS Two-Way Radio offers
a Standard Charger and a Rapid Charger,
which are designed to charge either the battery
with the radio or a standalone battery.
The RDM radio comes equipped with a
Standard Charger.
Use only use Motorola-approved Drop-in Tray
Single Unit Charger or Drop-in Tray Multi Unit
Charger to charge the Motorola-approved
battery.
Note: When acquiring additional chargers or
power supplies, make sure you have similar
drop-in tray chargers and power supplies
sets (all “rapid” or all “standard”). For part
number details, refer to "Chargers” on
page 67.
Charging The Battery Attached to the Radio
1. Place the drop-in tray charger on a flat surface.
2. Insert the connector of the power supply into the
port on the side of the drop-in tray charger.
3. Plug the AC adaptor into a power outlet.
4. Insert the radio with battery into the tray with the
front of the radio facing the front of the charger.
Note: Before charging a battery attached to a
radio, turn the radio OFF to ensure a full
charge. See "Operational Safety Guidelines”
on page vi for more information.
Power Supply
(Transformer)
Drop-in Tray
Charger Port