Motorola i205 - Manual (Page 53)

45
Group Connect TM Calls
2 Scroll to Last Call.
3 Press
A under Select.
To set your phone to call a Direct Connect number
you choose:
1 From the main menu, select Settings > DC/GC
Options > One Touch DC > Assigned
Number.
2 To enter the Direct Connect number you want
your phone to call every time you press the PTT
button:
Enter the number using your keypad. -or-
Press A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
Tip: If you are entering a Talkgroup number,
enter # before the number.
3 Press A under Ok.
To turn off One Touch Direct Connect:
1 From the main menu, select Settings > DC/GC
Options > One Touch DC.
2 Scroll to Off.
3 Press
A under Select.
Group Connect TM Calls
A Group Connect call is similar to a Direct Connect
call, but is made to all members of a Talkgroup at
once. A Talkgroup is a predetermined group of up
to 25 Nextel customers.
Before you can make or receive Group Connect
calls, a Talkgroup must be established. After the
Talkgroup is established, you must join the
Talkgroup.
Joining a Talkgroup
When you enable security on your phone, you
receive a list of Talkgroups that have been set up
for you if you subscribe to this service. The
Talkgroup list is saved to Contacts.
To receive Group Connect calls made to any of
these Talkgroups, you must join the Talkgroup.
1 Press A under Contcs. -or-
From the main menu, select Contacts.
2 Scroll to the Talkgroup you want to join.
3 Press
A under Join.
Note: You will now be able to receive Group
Connect communications from this
Talkgroup only. You can only monitor one
Talkgroup at a time.