Mocomtech SLM-5650 - Manual (Page 89)

SLM-5650 Satellite Modem Revision 2
Front Panel Operation MN/SLM5650.IOM
4–19
4.3.1.7 Select: CONFIG: Reset
IMPORTANT
When selecting RESET all parameters in the modem get reset to the
default settings. This includes the real time clock and the stored
configurations.
4.3.1.8 Select: CONFIG: Remote
Local Permits the user to select Local, which will limit the remote control to only be
able to monitor the status of the modem.
Remote Permits the user to select Remote, which will enable remote control. Further
selections under remote include, Serial or Ethernet.
Select: CONFIG: Remote: Remote
Select Serial or Ethernet by using efarrow keys, then press [E].
Serial Permits the user to select the interface type either RS-232, RS-485 2 wire or
RS-485 4 wire and the baud rate.
Ethernet Permits the user to select Ethernet.
Select: CONFIG: Remote: Remote: Serial
If Serial was selected:
Are you sure that you want to default the
modem configuration? No Yes (
efE)
Remote Control: Local
Remote (
efE)
Remote Control: Serial
Ethernet (
efE)
Remote Control: Interface
Baudrate (
efE)