Mocomtech SLM-5650 - Manual (Page 139)

SLM-5650 Satellite Modem Revision 1
Remote Control MN/SLM5650.IOM
B–17
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Rx Spectrum
Invert RSI= 1 byte, value
of 0 or 1 Command or Query.
Rx Spectrum Invert, where:
0=Normal
1=Rx Spectrum Invert
Example: RSI=0 (selects Normal) RSI=
RSI?
RSI*
RSI# RSI? RSI=x
(see description of
arguments)
Rx
Descrambler RDS= 1 byte, value
of 0 thru 6 Command or Query.
Rx Scrambler state, where:
0 = Off
1 = OM-73 Scrambler
2 = V.35 Scrambler
3 = Modified V.35 (EFData Closed Network)
4 = Reed-Solomon Synchronous Scrambler
5 = IBS Overhead Synchronous Scrambler
6 = TURBO Scrambler
Depending on Modem mode, FEC type, overhead type, and RS
state, not all of these selections will be valid.
Example: RDS=1 (OM-73 Scrambler On) RDS=
RDS?
RDS*
RDS# RDS? RDS=x
(see description of
arguments)
Rx
Differential
Decoding RDD= 1 byte, value
of 0 or 1 Command or Query.
Rx Differential Decoding, where:
x=Rx Differential Decoding, where:
0=Off
1=On
Depending on FEC type or Modulation Type, not all of these
selections will be valid.
Example: RDD=1 (selects Rx Differential Decoding On) RDD=
RDD?
RDD*
RDD# RDD? RDD=x
(see description of
arguments)