Moxa Technologies CP-168U User Manual
Page 9
Introduction
Smartio CP-168U User’s Manual 1-3
PCI Solution
The CP-168U board complies with PCI Spec. 2.1, and does not use either switches or
jumpers. The hardware configuration for the IRQ and memory addresses is automatically
assigned by the PCI BIOS. Hence, the board MUST be plugged in before installing the
driver software. For more PCI information, refer to the Technical Reference Appendix.
Surge Protection
To prevent the board from being damaged by lightning or high potential voltage, embedded
15 KV ESD protection is used in the CP-168U board. This is required for harsh
environments, such as in factory settings, under severe weather conditions, such as
lightning, or other high interference situations.
Operating System Support
The CP-168U board supports Windows 2000/XP/2003, Windows NT, Windows 95/98,
DOS, FreeBSD, SCO, and Linux. You ma
more detailed installation guide.
MOXA Serial Comm Tool
For application development, MOXA provides an easy-to-use serial communication library
(PComm) under Windows 2000/XP/2003 and Windows 95/98/NT. With this library, it is
easy to develop your own applications using sample applications developed with Visual
Basic, Visual C++, Borland Delphi, etc. Utilities such as diagnostic, monitor, and terminal
emulation are also included for debugging and monitoring communication status, terminal
emulation, and file transfer.