Installing the driver – Moxa Technologies CP-168U User Manual
Page 18
3-2 Smartio CP-168U User’s Manual
Installing the Driver
1. After installing the UPCI/PCI board and powering on your PC, Windows 2003 will
auto detect and find the UPCI/PCI board you just added. The Found New Hardware
window will open at the bottom right corner of the desktop.
2. The Welcome to the Found New Hardware Wizard window will open automatically.
Select Install from a list or specific location (Advanced) and click on Next to
continue.
3. Select Search for the best driver in these locations., check Include this location in
the search, and then click on Browse. You should be able to locate the
\Software\Win2K-XP-2003 folder on the software CD. Click on Next to continue.