Moxa Technologies CP-168U - Manual (Page 50)

3-34 Smartio CP-168U User’s Manual
! PCI Boards: C168H/PCI, C104H/PCI, C104HS/PCI, CP-114, CP-114I, CP-114S, CP-
114IS, CP-132, CP-132I, CP-132S, CP-132IS
! ISA Boards: C168H, C168HS, C168P, C104H, C104HS, C104P, CI-104J, CI-104JS,
CI-134, CI-134I, CI-134IS, CI-132, CI-132I, CI-132IS
! cPCI Boards: CT-114I
The following steps are using CP-168U as an example.
Installing the Driver
First Time Driver Installation
The following procedure shows how to install the Smartio CP-168U driver for the first time.
First make sure the board or boards are already plugged into the system’s PCI slot(s).
1. Log into NT as Administrator.
2. Copy the folder Windows.nt located under \Software\WinNT on the software CD, to
your computer’s hard disk (under the C: drive, for example).
3. Open the [Control Panel], click the [Network] icon, and then select the [Adapters]
tab.
4. Click the [Add] button, and then the [Have Disk...] button in the [Select Network
Adapter] dialog box.
5. Specify the exact path of the driver diskette, C:\Windows.nt in the example shown here,
and then click [OK] to proceed.