Moxa Technologies EDS-518A Series - Manual (Page 18)

EDS-518A Series User’s Manual Featured Functions
3-3
Password
EDS-518A provides two levels of access privileges: admin privilege gives read/write access to all
EDS-518A configuration parameters, and user privilege provides read access only. You will be
able to view the configuration, but will not be able to make modifications.
ATTENTION
EDS-518A’s default Password is not set (i.e., is blank). If a Password is already set, then you
will be required to type the Password when logging into the RS-232 Console, Telnet Console, or
Web Browser interface.
Account
Setting Description Factory Default
admin “admin” privilege allows the user to modify all
EDS-518A configurations.
user “user” privilege only allows viewing EDS-518A
configurations.
admin
Password
Setting Description Factory Default
Old Password
(Max. 16 Characters) Type current password when changing the
password None
New Password
(Max. 16 Characters) Type new password when changing the password None
Retype Password
(Max. 16 Characters) If you type a new password in the Password field,
you will be required to retype the password in the
Retype new password field before updating the
new password. None