MicroBoards Technology QD-DVD 127 - Manual (Page 6)

6
Hardware Description
The QD-DVD MultiDrive system consists of a DVD reader, 3, 5, or 7 DVD Recorders (based on
model), USB Connection, and Controller module.
The master discs always go into the DVD reader drive (top).
The blank media will always go into the DVD Recorder drives.
The power switch and power LED are also located on the front of the QD-DVD MultiDrive
duplicator.
The USB Connection is located on the back of the QD-DVD MultiDrive.
The LCD display will show the different menu selections and also information pertaining to the
recording process. Here is a typical example of what is displayed during the COPY process:
DVD Reader Drive
DVD Recorder Drives
Controller Interface
Power Switch
Power LED
Copying – DVD 71%
1269.5 MB 01:15
Displays the function being performed,
such as Copying or Testing, and shows the
record speed during duplication.
Shows the percentage
completed for this action.
Displays the amount of data left to be
recorded. This number starts at the capacity
of the master and counts down. Shows the time remaining to
complete this action. This
number also counts down.
QD-DVD 123