MicroBoards Technology QD-DVD 127 - Manual (Page 16)

16
Burn Mode
There are 3 options for the Burn Mode setting:
1. DAO (Disc At Once)
2. TAO – Not Close (Track At Once, not closed)
3. TAO (Track At Once, closed)
The default setting is DAO. It is recommended that this setting be used.
Display Time
The display time function is used to display the total record time, after the recording is completed.
The default setting is Off.
Button Sound
The Button Sound function is used to turn on or off the beep sound a button makes when
pressed. The default setting is On.
Device Info
The Device Info function displays a variety of information about the reader and recorder drives,
including model number and firmware revision. Please review the Setup Menu on page 14 for
more details.
System Info
The System Info function displays a variety of information about the controller module, including
model number and firmware revision. Please review the Setup Menu on page 14 for more
details.
Quick Erase
The Quick Erase function is used to Erase CD-RW and DVD-RW media. This option performs
the Quick erase of the discs.
Full Erase
The Full Erase function is used to Erase CD-RW DVD-RW media. This option performs the Full
erase of the discs.
Auto Close Tray
The Auto Close Tray function will automatically re-close the recorder trays based on the
selections made in the Auto Start Drive settings. Select the time period (in seconds) from those
shown. The default setting is OFF
Quick Compare
The Quick Compare function is not enabled on the QD-DVD MultiDrive. The default setting of
OFF should not be changed.
Audio Burn Speed
This allows you to set the burn speed for Audio discs independently of the CD Burn Speed. This
burn speed setting will always be used during duplication of audio discs. Note that some burn
speeds are not supported by CD-R media, and will burn at the next lowest supported speed.