MicroBoards Technology QD-DVD 127 - Manual (Page 15)

15
Language
The QD-DVD MultiDrive duplicator has two language options, English and Spanish. English is
the default setting.
CD Burn Speed
The default CD record speed for the QD-DVD MultiDrive is Maximum (48x). The other available
record speed options are: 40x, 32x, 24x, 20x, 16x, 10x, and, 4x. Note that some burn speeds are
not supported by CD-R media, and will burn at the next lowest supported speed.
DVD Burn Speed
The default DVD record speed for the QD-DVD MultiDrive is Maximum (16x). The other record
speed options are: 12x, 8x, 6x, 4x, 2x, and 1x.
Read Speed
The default CD read speed for the QD-DVD MultiDrive is Maximum (48x). The other read speed
options are: 48x, 40x, 16x, and 8x.
Auto Start Drive
The Auto Start Drive is used to automatically start recording, once the master disc and blank
discs are inserted into the drives.
There are 3 options for this setting, Off, 1 and 2. To use this feature, change the value from OFF
to 1. The 2 setting is not used. Once the value is set to 1, the system will automatically start
recording once a master and blank discs are detected.
Startup Menu
The Startup Menu selection allows you to select the main menu item that appears when the QD-
DVD MultiDrive duplicator starts up. The default setting is 1. Copy. Any of the 9 menu items can
be selected.
Auto Verify
The Auto Verify function can be turned On if you wish to verify every copy you make with the QD-
DVD MultiDrive duplicator. The verify function checks the copied disc, to see if it can be read. It
does not compare the copy with the master disc. The default setting is Off.
Auto Compare
The Auto Compare function can be turned On if you wish to Compare every copy with the master
disc. The Compare function only works with Data master discs. If there is audio or video on the
master disc, the Compare function will not work. The default setting is Off.
Auto Prescan
The Auto Prescan function can be turned On if you with to Prescan every master disc before
recording. The default setting is Off.
Eject Disc
There are 3 options for the Eject Disc setting:
1. Eject good discs only
2. Eject all discs
3. Do not eject discs
The default setting is to eject the good discs only.