Metrologic Instruments MS951 - Manual (Page 8)

D F 1
R 1 8
R 1 9
D F 1
Recall Defaults
3
Enter Program Mode
**Ability to Enter Program When this option is selected, pro-
Mode After Any Scan gramming can be entered by scann-ing
the ENTER/EXIT PROGRAM MODE
bar code after power up or during
normal scanning operation.
Enter Program Mode When this option is selected, the
Only on First Scan scanner will only enter program
mode after power-up. Scan the
ENTER/ EXIT PROGRAM MODE
bar code immediately after the scan-
ner first receives power. This option
prevents the scanner from accident-
ally entering program mode during
normal scanning operation.
Recall Defaults
If during programming of the scanner,
there is a need to return to the original
Recall Defaults
factory settings, scan the RECALL
DEFAULTS bar code. Any settings
selected during that session or a
previous session will be lost.