Metrologic Instruments MS951 - Manual (Page 53)

* *
R A T
R A U
R A V
R A W
R A X
Enter/Exit Program Mode
48
User Programmable Prefix and Suffix ID Characters
User selected prefix/suffix characters can be programmed into the scanner by
scanning the 3 digit decimal equivalent of the ASCII character into the
appropriate character location with the RB0-RB9 bar codes. For example,
scan RAT, RB0, RB0, RB7 (007 = decimal equivalent of an ASCII "BEL"
character) and the scanner will transmit an ASCII "BEL" character before each
bar code. For single character prefixes or suffixes always configure the "1st"
position. Use the ASCII Reference Table on pages 50-54 for the decimal
equivalents. Some PC keyboard extended keys like F1-F12 can also be
supported. See the PC Extended Key Reference Table on pages 55 and 56.
1st Programmable Prefix ID
2nd Programmable Prefix ID
1st Programmable Suffix ID
2nd Programmable Suffix ID
Clear All Programmable Prefixes and Suffixes