Metrologic Instruments MS951 - Manual (Page 32)

D F 1
L P 1
L P 3
L P 4
L P 5
L P 6
R 5 8
R 5 9
Recall Defaults
27
Light Pen Options
If your scanner will be used in place of a light pen, Enable Light
scan the ENABLE LIGHT PEN INTERFACE bar Pen Interface
code. When this interface is enabled, the scanner
can output a bar or space as the high signal. Enable
the appropriate option for your specific application.
When TRANSMIT AS CODE 39 is enabled, the
** Bars High
scanner will output the bar code’s bar or space
high signal as Code 39. These settings will only
work with a Version 15 (LTPN) MS951 scanner.
Spaces High
** Transmit as Scanned
Transmit as Code 39
Poll Light Pen 5 Volts When this option is enabled, the scanner will wait
for an active source voltage before transmitting the
data.
** No Polling Light Pen