Metrologic Instruments MS951 - Manual (Page 13)

* *
O C 5
O C 6
O C 7
O C 8
O C 9
R 5 0
R 5 1
Enter/Exit Program Mode
8
Audible Indicators for Communication Timeouts
Two Second Timeout When this option is selected, the scanner will
timeout if it does not transmit its data to the host
after two seconds during communication. This is
only valid in modes where some type of
** No Two Second handshaking is involved.
Timeout
Razz Beep on Timeout When this option is selected, the scanner will
produce an audible razzberry tone when
communications have timed out.
** No Tone On Timeout
Three Beep on Timeout When this option is selected, the scanner will
beep three times when communications have
timed out.
** Beep Before Transmit When this option is chosen, the scanner will
beep before each label is transmitted.
Beep After Transmit When this option is chosen, the scanner will
beep after each label is transmitted.
Generally used in conjunction with 2
second communications time out.
Especially useful with OCIA and IBM
46XX applications.