MITSUBISHI ELECTRIC DLP XD460U - Manual (Page 30)

EN-30
Mouse remote control
By connecting to personal computer through the USB port, you can operate your computer with the projector remote
control.
Projector + computer with USB connector
Operation
• You can use the mouse remote control function with a computer supporting USB only.
• When the lamp is turned ON, the computer connected with the USB cable may not work correctly. In this case,
restart the projector and the computer. If possible, you should disconnect the USB cable when the lamp is turned
ON.
• The mouse doesn’t function for a while after the power is turned on.
COMPUTER
VIDEO S-VIDEO DVI-D(HDCP)
HOME PageUP
END PageDOWN
AUTO POSITION
KEYSTONE
1 2
MENU ENTER
LASER
R-CLICK
USB
mouse pointer
Use to move the cursor on
the image, instead of the
computer mouse.
R-CLICK
This operates in the same
way as the right button on
the computer mouse.
left click
This operates in the same
way as the left button on
the computer mouse.
USB cable
USB 4-pin
(type B)
USB 4-pin
(type A)
to USB port
HOME button
Press to jump back
to the fi rst page.
END button
Press to jump to the
last page.
PageUP button
Press to go to the
next page.
PageDOWN button
Press to go back to
the previous page.
Advanced features (continued)