beautypg.com

Viewing computer images, En-13, A. connecting the projector to a computer – MITSUBISHI ELECTRIC DLP XD460U User Manual

Page 13

background image

EN-13

ENGLISH

2

1

2

1

Viewing computer images

A. Connecting the projector to a computer

Preparation:
• Make sure that the power of the projector and that of the computer are turned off.
• When connecting the projector to a desktop computer, disconnect the RGB cable that is connected to the monitor.

For analog connection:

1. Connect one end of the supplied RGB cable to the

COMPUTER IN/COMPONENT VIDEO IN-1/2 terminal of the
projector.

2. Connect the other end of the RGB cable to the monitor

port of the computer.

• Additional devices, such as a conversion connector and an

analog RGB output adapter, are required depending on the
type of the computer to be connected.

• When viewing images supplied from an analog-connected

computer, press the COMPUTER button on the remote
control.

• This projector does not support 3-line signals (SYNC-ON-

GREEN signals).

For digital connection:
1. Connect one end of a commercially available DVI cable to

the DVI-D (HDCP) terminal of the projector.

2. Connect the other end of the DVI cable to the DVI terminal

of the computer.

• Additional devices, such as a conversion connector and an

analog RGB output adapter, are required depending on the
type of the computer to be connected.

• When viewing images supplied from a digital-connected

computer, press the DVI-D(HDCP) button on the remote
control.

For audio connection:

• Plug the power cord of the projector in the wall outlet fi rst,

and then boot up the computer.

• This projector uses stereo pin jack for its audio input. Check

the type of the audio output terminal of the connected
computer and prepare a proper cable for connection. Some
computers don't have the audio output terminal.

• Speaker output is mono.
• When the audio cable is connected to the AUDIO OUT ter-

minal, the speaker output is muted.

For monitor connection:
1. Connect one end of the RGB cable that is connected to the

MONITOR OUT terminal of the projector.

COMPUTER IN/
COMPONENT VIDEO IN

DVI-D (HDCP)

to monitor port

RGB cable

DVI cable

to DVI

AUDIO OUT

AUDIO IN

Computer

PC audio cable (option)

to PC audio
output

RGB cable

Monitor