MITSUBISHI ELECTRIC DLP XD460U - Manual (Page 24)

EN-24
3. FEATURE menu
ITEM SETTING
FUNCTION
ASPECT AUTO Select to change the aspect ratio automatically depending on the input signal.
16:9 Select to project images with an aspect ratio of 16:9.
REAL Select to project images in their original size as input. Not available when the
keystone adjustment is applied.
PASSWORD FUNCTION Use to enable or cancel the password lock. See page 28 for details.
MENU POSITION 2 options Use to change the position of the menu.
CINEMA MODE AUTO The fi lm mode will be automatically activated when a fi lm source signal is input.
OFF The fi lm mode will not be activated.
VIDEO SIGNAL 8 options When AUTO is selected, the appropriate video format is automatically selected
depending on the input signal. If the image isn’t displayed correctly, select the
desired video format manually.
SET UP AUTO Select to change the SET UP mode automatically.
OFF Select to make black lighter.
3.75%/7.5% Select to make black thicker.
• When 7.5% is chosen, the brightness is decreased by set-up cancel func-
tion for U.S. Choose OFF when the image is dark.
SCART INPUT ON / OFF Choose ON when connecting the projector with a device equipped with the
SCART terminal that can output RGB signal. SCART terminal is used mainly
in Europe. Choose OFF normally. (Available only for the input signal from the
COMPUTER/COMPONENT VIDEO IN-1 terminal.)
LANGUAGE 10 languages Use to select the language used in the menus.
RESET ALL Use to reset the settings of the menu (excluding PASSWORD FUNCTION and
LANGUAGE) to the factory setting values.
• CINEMA MODE can be adjusted only when a TV60,480i signal is being displayed.
• When SCART INPUT is set to ON, nothing is output to the external monitor.
• When SCART INPUT is set to ON, normal computer signals aren
't projected.
• Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device
equipped with the SCART terminal.
• Some AV devices equipped with the SCART terminal aren 't compatible with this projector.
4. SIGNAL menu
ITEM SETTING
FUNCTION
HORIZ. POSITION * Use to adjust the horizontal position of the projected image.
VERT. POSITION * Use to adjust the vertical position of the projected image.
FINE SYNC. Use to eliminate fl ickering or blur, if appears, viewing the projected image.
TRACKING * Use to eliminate vertical wide stripes, if appears, viewing the projected image.
COMPUTER INPUT RGB Select this option when connecting the projector to high defi nition video
equipment having R, G, and B output terminals.
YC
B
C
R
/YP
B
P
R
Select this option when connecting the projector to a DVD player or other
device having Y, C
B
, and C
R
(or Y, P
B
, and P
R)
component video output terminals.
HOLD Use to adjust the image when fl agging occurs near the top of the screen.
USER
CLAMP POSITION */
CLAMP WIDTH * Use to correct solid white or solid black in the projected image.
VERT.SYNC Use to adjust the image when its motion doesn't run smoothly. Select AUTO
for normal use.
OVER SCAN * Use to adjust the display area of projected image.
LPF Use to select whether or not to enable the LPF.
SHUTTER (U) Use to adjust the image when noise appears on the top part of the image.
SHUTTER (L) Use to adjust the image when noise appears on the bottom part of the image.
SHUTTER (LS) Use to adjust the image when noise appears on the left half of the image.
SHUTTER (RS) Use to adjust the image when noise appears on the right half of the image.
• Though horizontal strips may appear on the enlarged projected image, such symptom is not a malfunction.
• Options marked with an asterisk (*) become unavailable depending on the type of the input signal.
• When you change the horizontal or vertical position to a large extent, noise may appear.
• The adjustable range of the vertical position varies depending on the type of the input signal. Though the image
may stay in the same position even when the setting value is changed, such symptom is not a malfunction.
Important:
• You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.
Menu operation (continued)