Motorola 60t - Manual (Page 149)

147
Troubleshooting
My phone
beeped when I
attached the
data cable, but
my data
applications
don’t work. You must be in an area with digital
coverage. Check your phone’s display
for the digital signal indicator (
F ).
Some wireless networks may not
support data transmission. If you see
the digital indicator, but you are
roaming on an unfamiliar network, this
may be the case.
Also, remember that data transmission
usually requires a subscription. Call your
service provider for more information.
When sending
data with the
data cable, why
does the
computer show a
connection rate
of 19200 Kbps? 19200 Kbps is the data transfer rate of
the connection between your computer
and the phone. The rate of the
connection between your phone and
the network is displayed on your phone,
and will be either 14400 or 9600 Kbps.
I can’t end my
data call by
closing the
application on
my computer.
What can I do? Try pressing
O
on your phone. Also try
disconnecting the cable or turning off
the phone. If possible, always close the
connection through your computer.
These alternative methods may disrupt
the application on your computer.
Problem Solution