Motorola 60t - Manual (Page 133)

131
Data Calls
Connect your phone (see “Connecting Your Phone to an External
Device” on page 128) and do the following:
Receiving a Data Call
You can connect your phone to a computer or hand-held device
to receive data.
Use this feature to transfer data to your computer from another
device.
Set Up Your Phone
Before you receive a data call, you must configure your phone for
the incoming call type and connect the phone to the device that
will receive the call.
Do This To
1 Check the phone make sure that the phone is
connected and powered on
2 Open the
application on
your computer place the call through the application
(such as dial-up-networking)
Note: You cannot dial data numbers
through your phone’s keypad. You
must dial them through your
computer.
3 End the transfer
on your computer close the call and connection when
the transfer is complete
Find the Feature M > Settings > Connection
> Incoming Call