Moxa Technologies 5400 - Manual (Page 61)

Configuring Windows Administrator
Blank
The NPort is not password protected, and “Broadcast Search” was used to locate it.
Fixed
The NPort is not password protected, and “Search by IP address” was used to locate it.
Lock Fixed
The NPort is password protected, “Specify by IP address” was used to locate it, and the password has
not yet been entered from within the current Administrator session.
Unlock Fixed
The NPort is password protected, “Specify by IP address” was used to locate it, and the password has
been entered from within the current Administrator session. Henceforth during this Administrator
session, activating various utilities for this NPort will not require re-entering the server password.
Configuring NPort 5410/5430/5340I
Input the password to Unlock the NPort.
Right click on a specific NPort and select
configure to start the configuration.
The progress bar shows that Administrator is retrieving configuration
information from the specific NPort.
Refer to Chapter 5 for each parameter’s function definition.
To modify the configuration, you must first click in the modify box to
activate the parameter setting box.
You can simultaneously modify the configurations of multiple NPorts that are of the same model.
To select multiple NPorts, hold down the Ctrl key when selecting additional NPorts, or hold down the
Shift key to select a group of NPorts.
NPort 5400 Series User’s Manual 6-7