Moxa Technologies 5400 - Manual (Page 31)

Web Console Configuration
Click on the Modify button to open the
Modify time settings window to input the
correct local time.
Time server
Setting Factory Default Necessity
IP or Domain address
(E.g., 192.168.1.1 or time.stdtime.gov.tw
or time.nist.gov) None Optional
NPort 5410/5430/5340I uses SNTP (RFC-1769) for auto time calibration.
Input the correct “Time Server” IP address or domain address. Once NPort is configured with the
correct Time Server address, NPort will request time information from the “Time Server” every 10
minutes.
Console
The “Disable” option for Web Console and Telnet Console is included for security reasons. In some
cases, you may want to Disable one or both of these Console utilities as an extra precaution to prevent
unauthorized users from accessing your NPort. The factory default for both Web Console and Telnet
Console is Enable.
Setting Factory Default Necessity
Enable or Disable Enable Required
If you disable both the “Web Console” and “Telnet Console,” you can still use the LCM Display to
configure NPort locally, or Windows Administrator to configure NPort either locally or remotely over
the network.
Network Settings
NPort 5400 Series User’s Manual 5-5