Moxa Technologies 5400 - Manual (Page 28)

Opening Your Browser
1. Open your browser with the cookie function enabled. (To enable your browser for cookies, right
click on your desktop Internet Explorer icon, select Properties, click on the Security tab, and then
select the three Enable options as shown in the figure below.)
2. Type 192.168.127.254 in the Address input
box (use the correct IP address if different from the
default), and then press Enter.
3. Input the password if prompted. The password will
be transmitted with MD5 encryption over the
Ethernet.
Note that you will not be prompted to enter the
password if the NPort is not currently password
protected.
If you use other web browsers, remember to Enable the functions to “allow cookies that are stored on
your computer” or “allow per-session cookies”.
Cookies that used by NPort, is only for the “password” transmission.
Refer to Chapter 3 “Initial IP Address Configuration” for the IP configuration. Examples that used in
this chapter are using Factory Default IP address (192.168.127.254).
NPort 5400 Series User’s Manual 5-2